The following defects have been fixed in AutoCAD MEP 2010 Update 1:
Duct
- Duct Flanges are displayed incorrectly after moving a duct using grips.
- Velocity in Duct Modify does not match the Velocity in the Properties Palette.
- Add Selected does not work correctly when duct height is greater than duct width.
- Takeoff for branch is not sized correctly when duct height is greater than duct width.
- Top and Bottom Elevation are incorrect in tooltip when duct height is greater than duct width.
Electrical
- A crash may occur when closing a drawing with an EPD file that has a relative path.
- A crash may occur when converting multiple blocks to Devices.
- Wire will only connect to one connector on some scaled devices.
- Device modify via grip edit doesn't move or maintain its orientation as expected.
- The Add Automatic Property for a Device was not retrieving the Load Category or Number of Poles.
Pipe
- The formula for percentage slope by angle is incorrect. Fixing this means that an existing tool in which a specific number for percentage is stored will produce a different slope due to the new calculation.
- Pipe layouts with Very low slope cannot be created correctly.
- The Parallel Pipe command places new pipes on the wrong layer when systems use different layers.
- Some Pipe created in previous versions of AutoCAD MEP snaps to fittings when opened.
Multi-View Parts
- Some linework is missing from certain MvParts.
- Radiator insertion fails, using the window option, if the radiator width or length is located in a basic table.
- Radiator Import does not set property data properly.
- Radiator valves are not aligned to the radiator when inserted using the plus grip.
Display
- Haloed or hidden appearance for Plumbing Lines, Schematic lines and Wires do not display correctly.
Miscellaneous
- CollisionDetection does not work as expected.
- "Copy to Clipboard failed" dialog will appear when copying an object that has been copy/pasted from another drawing.
- A fatal error will occur when creating an elbow with multiple segments.
Problems in AutoCAD MEP Reported with the Customer Error Reporting Utility
As a result of detailed information from customers who used the Customer Error Reporting Utility, a number of problems were identified and fixed. Updates have been made in the following commands and features:
- Export to AutoCAD
- DuctFittingAdd
- Switch Model Space to Paper Space
- DuctSystemSizeCalc
- Opening Legacy drawings
General Updates to AutoCAD Architecture
The following defects have been fixed in AutoCAD Architecture 2010 Update 1:
AEC Dimensions
- Multiple overlapping windows may lead to incorrect dimensions.
API
- AutoCAD Architecture might crash when trying to define a Display Theme style using .NET API.
IFC
- Slabs may have the wrong elevation when imported from an IFC file due to an incorrect thickness offset.
- Exporting a drawing to IFC may create incorrect IFC GUIDs for AEC objects.
- Importing IFC files that contain certain material settings may crash.
- Space exported to IFC have the IFC type of IFCTYPEOBJECT instead of IFCSPACETYPE.
Layers
- The "New layer from Standard" button doesn't work in localized versions.
- Layer description fields are not automatically populated in all cases.
Performance
- Response is very slow when using Dynamic UCS and objects are Isolated.
Property Palette
- Changing an entry to one that is the first characters of the previous entry will not work in some fields.
Schedules
- Schedules are not sorted as expected when values are a combination of numeric and alphabetic characters.
Sections
- Some objects imported from Inventor display as points in 2D Sections.
Structural Members
- Custom block based on 3D Solids using Boolean operations are always placed at the start point.
Wall Objects
- AutoCAD Architecture might hang when opening certain drawings that contain modified Wall Endcaps.
- Window openings may not be created due to Wall Plan Modifiers.
Using Refedit on a block containing Wall Object may cause a crash.
Xrefs
- Openings in Xrefs with negative Z value are placed at an incorrect position.
Subscription Benefits
- With this update, if you are a subscription customer, a balloon notification periodically displays, letting you know how much time remains before your subscription expires. This notification will display only three times. You can also more quickly and easily access selected subscription benefits, without having to log onto the Subscription Center.
Online Renewal
- If you meet the online renewal program rules, you can renew your AutoCAD MEP subscription online. If you have already renewed your subscription, or are not a subscription customer, these options are not available.
- In InfoCenter, follow the directions in the alert message that displays.
- In InfoCenter, click the Subscription Center button. Under Benefits Center, click Renew Online and follow the directions that display.
eLearning
- In InfoCenter, click the Subscription Center button. Under Benefits Center, click View eLearning Catalog. You will be prompted to sign-in to the Subscription Center.
Search
- You can access some subscription-only learning and technical support without logging onto the Subscription Center. This includes some eLearning lessons.
Problems Reported with the Customer Error Reporting Utility
As a result of detailed information from customers who used the Customer Error Reporting Utility, a number of problems were identified and fixed. Updates have been made in the following commands and features:
- 3D Navigation Tools
- Action Recorder
- Annotation Scaling
- Blocks
- Check Spelling
- Customize User Interface (CUI)
- Database Connectivity
- Dimensions
- DWF
- Dynamic Dimensions
- External References
- File Navigation
- File Save
- Graphic System
- Hatch
- Image
- Keyboard Modifiers
- Licensing
- Migration
- Measure
- Memory Handling
- Multiline Text (mtext)
- Object Snaps
- Parametric Constraints
- Purge
- Plot
- Quick Access Toolbar
- Ribbon
- Sheet Set Manager
- ShowMotion
- Visual Styles
General Updates
The following defects have been fixed:
2D Drawing
- If the PLINETYPE system variable is set to 0, STRETCH does not work as expected on arc segments of polylines.
- When the PLINETYPE system variable is set to 0, the closing point of a polyline with segments of different widths do not display correctly.
- If you use the JOIN command on splines, a duplicate control point is inserted.
- When you use the JOIN command on multiple polylines, AutoCAD may crash.
3D Modeling
- When you open a drawing that contains solids, some solids display briefly and then disappear.
- If a grip on a mesh face, edge, or vertex is highlighted and you use the ViewCube, AutoCAD crashes.
3D Navigation Tools
- When you use the 3DORBIT command, you cannot orbit correctly. You can only orbit around a single pivot point and you cannot orbit around a specific object in a large group of objects.
Action Recorder
- An Action Recorder macro created in AutoCAD 2009 may fail to run in AutoCAD 2010.
Annotation Scaling
- When there are xrefs in a drawing, changing annotation scales takes a long time.
- When an annotative style multiline text (mtext) is rotated or surrounded by a hatch, the boundary box does not display correctly.
Blocks
- When you turn off the display of an attribute with a visibility parameter in a dynamic block, the Enhanced Attribute Editor lists attribute prompts incorrectly.
- You cannot copy an object from an AutoCAD 2009 drawing and paste it as a block into an AutoCAD 2010 drawing.
- You cannot use the Properties palette to set the value of a action parameter to 0.
- When you delete a constraint parameter from a dynamic block, AutoCAD may crash.
- You cannot stretch some dynamic blocks as expected.
Check Spelling
- When you run spellcheck on uppercase words, AutoCAD may crash.
CUI
- When you save a workspace, if the Enterprise CUIx file is read-only, AutoCAD crashes.
- Toolbar flyouts close unexpectedly.
Data Extraction
- When you use Data Extraction to extract the value of a block's multiline attribute into a table, text formatting code displays in the table.
DGN Support
- When a DGN file is imported, some attributes are missing.
Digital Signature
- When you open a drawing, the Invalid signature dialog box may display even if the digital signature is valid.
Dimensions
- You cannot create an angular dimension between two lines in different XY planes.
DWF
- When the background color in AutoCAD is black, some DWF underlays do not display correctly.
Dynamic Dimensions
- When you use the COPYBASE command with Dynamic Input on, AutoCAD crashes.
Export Layout
- When you use the EXPORTLAYOUT command on files in which Standard styles have been renamed, AutoCAD crashes.
External References
- You may not be able to bind multiple xrefs that include nested xrefs.
File Open
- When you try to open a drawing file from a FTP site, AutoCAD may crash.
Find and Replace
- If you use Find and Replace, autonumbering is deleted.
General UI
- On the status bar, the model or paperspace button may be missing, even after you have repeatedly turned it on.
Graphic System
- When the background color is changed in an active paperspace viewport, the cursor disappears.
- After you plot a drawing in AutoCAD, if you lock Microsoft Windows and then unlock it, AutoCAD may crash.
Hatch
- When you turn off the current layer while grip editing a hatch boundary, AutoCAD crashes.
- When the UCSVP system variable is set to 0, hatched objects align with the WCS rather than the UCS.
- When you grip edit a hatch with an elliptical boundary, AutoCAD crashes.
Image
- When you attach some TIFF images, AutoCAD crashes.
- TIFF images may not display correctly.
Inquiry Tools
- The AREA command fails on some polylines.
Keyboard Modifiers
- When temporary overrides are enabled, keyboard input using the Shift key may not display on the command line.
Layers
- Xrefs on locked layers do not display faded as expected. The LAYLOCKFADECTL system variable fails to alter them.
- When you delete a certain layer, all layers may be deleted.
- On the ribbon, the Layer drop-down does not display layers based on the current layer filter.
Licensing
- When you set your system time back more than 2 days, your license is broken.
- When you use a proxy server for internet access, the License Transfer Utility fails.
LiveUpdate
- When you have Autodesk 2009 and AutoCAD 2010 installed side-by-side, LiveUpdate does not work in AutoCAD 2009.
Measurement Tools
- When you use the MEASUREGEOM command, the tooltip and command line results are different. The tooltip result is incorrect.
- When you use the DIST command in model space, the results at the tooltip and the command line are different. The tooltip result is incorrect.
Migration
- When you export certain profiles, AutoCAD crashes.
- When you save certain profiles migrated from AutoCAD 2009, AutoCAD 2010 crashes.
Multileader (mleader)
- When you mirror mleaders that contain blocks with multiline attributes, the mirrored attributes are incorrectly justified.
- When you plot a drawing as a PDF file, the layer order is not alphabetized as expected.
- When a drawing that contains layers with names that include special characters is exported as a PDF, it cannot be opened.
- When you attach a large PDF file to your drawing, or try to attach it and then cancel the operation, performance is slow.
Publish
- When Windows XP is set to Windows Classic theme, on any Asian language version of AutoCAD 2010, if you use the PUBLISH command, AutoCAD freezes.
Purge
- On Windows Vista, in the Purge dialog box, when you attempt to use the Ctrl or Shift keys to select multiple items, the first highlighted item is de-selected.
QUICKCALC
- Calculations performed by the QUICKCALC command may be incorrect.
Recover
- When you use the RECOVER command on a AutoCAD 2000 formatted drawing file, polylines and splines in the drawing are deleted.
Reference Edit
- When you use the REFSET command, you can only add one instance of a block to the reference set. Other instances are rejected and an error message displays.
Ribbon
- Text styles from an attached xref display in the Ribbon text style control.
- When you switch between AutoCAD Classic and other workspaces (for example, 2D Drafting & Annotation or 3D Modeling), performance becomes slow.
- Layers with a VP Freeze for a viewport indicate the VP Freeze status even when the viewport is not active.
- When you click the File menu in the zero doc state, AutoCAD freezes.
- After you unload a partial CUI file, a tab remains on the ribbon. If you click the tab, AutoCAD crashes.
Section & Flatten
- When you section solids through API, multiple memory leaks occur.
Seek
- The SHAREWITHSEEK command may not work if the port used to communicate with Seek is blocked by a firewall.
Snaps
- When you snap to the grid, there may be a slight offset from the grid.
Visual Lisp
- When you use the CECOLOR system variable, the value returned by using the Getvar function is incorrect.
UCS
- In AutoCAD 2010 German, you cannot use ribbon controls to modify coordinates.
Xrefs
- With the XATTACH command, you cannot select multiple xrefs.
Posts
